Expert Tips for R/C Boat Owners

Expert Tips for R/C Boat Owners

If you have recently purchased a R/C boat, you are likely hoping it will provide you with hours and hours of wake-cutting fun. Believe it or not, remote control boat retailers also have a vested interest in you and your enjoyment with this new toy. These folks are genuine experts in these expensive and somewhat brittle playthings. What follows is a listing of a few general tips gleaned from these authorities in order to help you maximize your boat s time in the water and minimize your potential migraine headaches.

  1. Fuel Line Maintenance: Tubing edges need to be kept smooth, both on the outside and inside. A 12-inch loop should be left in the lines running from pipe to tank and the one that runs to the carburetor in order to better regulate engine performance consistency.
  2. How to Polish a Propeller: First, make sure that you only polish the keyed side of the propeller, leaving the back side alone. What this does is helps the prop push through the water. If you own a beryllium copper propeller, you should be aware of the fact that it needs finishing work prior to use.
  3. Colors: Some experts recommend painting your R/C boat in bright yellow or white. The primary reason for this is because these are the most eye-catching colors, making your boat stand out on the water.
  4. Hull Sealing: Hulls that are manufactured with ABS plastic must be sealed prior to you testing the boat. The hull should be lightly sanded with very fine, 320 grit, sandpaper. Then you are to wipe the hull clean and, if you own a nitro-powered R/C boat, prime it inside and out with  Nitro tough  paint. This can often be obtained at a hobby store in your area.
  5. Radio Checks: When you are getting everything organized for your trip to the water, make sure that your radio is functioning properly. One easy way to do this is to simply flip the  On  switch on the boat and the radio and run some test maneuvers, looking to ensure that everything is doing what it should be doing. Don t forget to flip the switch back to  Off  when you are done and before you take off for the water.

When you arrive at the lake, pond, pool or whatever body of water you like, double-check that your frequency is in sync with your receiver. This can be accomplished in a number of ways. One of the simplest methods is to merely turn the receiver in the boat on in order to ensure the servos are in correct operating shape.

So, now that you understand some of the basic steps you can take to be proactive in your preparation, you can set your mind at ease. Preventive maintenance along with some good, old fashioned common sense will enable you to fully enjoy your new hobby.

If you are seeking more information on things you can do to improve the performance of your R/C boat, be sure to check out the hobby retailers ranked and reviewed here by TopTenREVIEWS.

At TopTenREVIEWS We Do the Research So You Don t Have To. 

 

 

More Top Stories